40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  SUS Lab eLog  Not logged in ELOG logo
Entry  Sat Nov 24 20:09:14 2018, Duo, Misc, , Noise monitor PCB assembly completed 
    Reply  Sun Nov 25 19:25:37 2018, rana, HowTo, Electronics, Noise monitor PCB assembly completed 
Message ID: 1773     Entry time: Sun Nov 25 19:25:37 2018     In reply to: 1772
Author: rana 
Type: HowTo 
Category: Electronics 
Subject: Noise monitor PCB assembly completed 

you can just use some BNC clip doodles (mini grabbers, etc). Go directly from the test equip (scopes, analyzers) to the pins on the board. Or if you are able to mount the D-sub connectors, you can use a breakout board. Can borrow from the 40m if you don't have them in WB.

ELOG V3.1.3-