40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog, Page 56 of 56  Not logged in ELOG logo
ID Date Authorup Type Category Subject Text Attachments
  275   Wed Aug 19 11:20:03 2009 robComputingDAQbillions


   
        
            
 flower.png 
  276   Wed Aug 19 11:27:59 2009 robComputingPMCPMC Loop Changed


   
        
            
  
  354   Mon Sep 28 17:43:47 2009 robComputingDAQHack @ DAQ

    
        
  
  2659   Tue Sep 7 09:14:22 2021 shrutiMiscEquipment transferTED200C borrowedI borrowed (retrieved?) the TED200C temperature
controller from the north table in QIL to
use in the cryo lab.
  
  2725   Fri Feb 25 17:09:53 2022 shrutiUpdateWOPOWaking up WOPO - green beam[shruti, yehonathan]

SHG and 532 nm beam alignment

Yehonathan
brought over 532nm/1064nm laser goggles from
  
  2728   Fri Mar 4 11:49:45 2022 shrutiUpdateWOPOWaking up WOPO - attempts at readout[Yehonathan, Shruti]

1. Doubling cavity and green beam

Since
we had left the lasers ON with the shutters
 LO_shot_noise.pdf 
  2735   Tue Mar 22 09:19:38 2022 shrutiUpdateWOPOWaking up WOPO - back to green path[Yehonathan, Shruti]

Yesterday we went back to fiddling
with the green path. Soon after opening the
 before_opt.jpgaround_waveguide.png 
  2738   Mon Mar 28 14:29:22 2022 shrutiSafetyCleanlinessLab floodingWhen I went into QIL today there was a
lot of flooding from water dripping from
the ceiling at several places in the lab.
 Flooding.zip 
  2760   Thu Apr 21 10:33:33 2022 shrutiUpdateWOPOStill figuring out the readout electronics and fixing of some stuff[Yehonathan, Shruti]

 

First we turned on the relevant
  
  1604   Thu Feb 2 07:49:23 2012 steveLaserGYRONew vacuum system viewport design


   
        
            
  
  1635   Wed Mar 7 08:50:04 2012 steveLaserGYROchamber leak hunting advice

    

       
            
  
  1636   Wed Mar 7 09:05:22 2012 steveLaserGYROinput-side viewports installed & design flaw

    

       
            
  
  1736   Fri Aug 17 19:59:28 2012 taraElectronicsTempCtrltemp control for EOMHere is the entry about EOM temp control
used in PSL.
temp
  
  1742   Tue Aug 21 23:29:38 2012 taraMiscTempCtrlthermal insulation for cold finger and EOMI made a thermal insulation box for the
cell holder that will be used in iodine setupr,
see ATF:1665.
 IMG_1607.JPGIMG_1608.jpgIMG_1609.JPG 
  1765   Wed Sep 12 20:56:59 2012 taraElectronicsGeneralseismometers installedZach and I borrowed 2 seismometers from
the 40m. Den gave us Guralp and Barcadi with
their breakout boxes.
 IMG_1730.jpgIMG_1731.jpgIMG_1729.jpgIMG_1732.jpg 
  1774   Thu Sep 27 03:33:55 2012 taraLaserGYROPSL/Gyro beat setupFound the beat, the temperature on CTN
laser is 48.80 C, and gyro laser is 54.72
C for a 20MHz beat signal.
 beat_2012_09_27 
  12   Wed Dec 12 16:10:19 2007 tobinLab InfrastructureHVACLab TemperatureThe lab temperature at 2pm was a comfortable
69 degrees. 
  
  13   Wed Dec 12 16:19:00 2007 tobinLab InfrastructureHVACLab TemperatureI connected the particle counter to the Dell
computer for PEM data logging (temperature,
humidity, and particle count).  The data
 temperature.pdf 
  14   Thu Dec 13 18:47:02 2007 tobinLab InfrastructureHVACLab TemperatureExtech: 66.8F, 25%RH.  Met One: 68F, 20%RH.

Here is the datalogger's contents:
  
  15   Tue Dec 18 13:49:50 2007 tobinLab InfrastructureHVACLab TemperatureExtech: 68.6F, 57%RH.  Met One: 68F, 53%RH.
  Drizzling outside.
 temperature-20071218.pdf 
  16   Fri Dec 21 21:27:12 2007 tobinLab InfrastructureHVACLab TemperatureExtech: 67.9F, 26%RH. Met One: 68F, 20%RH.
 Clear & cold outside.
  
  18   Wed Jan 2 15:10:24 2008 tobinLab InfrastructureHVACLab TemperatureThe lab temperature appears to have been stable
over the holiday, always between 68.5 and
70.0 degrees F.   (There is no data from
  
  58   Thu May 29 20:00:48 2008 tobinComputingFuglyborkspace compilingDmass and I tried to compile and install a
new system on the borkspace machine here.
  
  59   Sun Jun 1 18:52:49 2008 tobinComputingGeneralborkspace compilingFollowing Alex's suggestions, I fixed the
front-end problems we were encountering the
other day.
  
ELOG V3.1.3-