40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
Entry  Tue Aug 24 18:37:37 2010, Zach, Laser, GYRO, Gyro "single-arm" test single_arm.png
    Reply  Tue Aug 24 19:24:58 2010, rana, Laser, GYRO, Gyro "single-arm" test 
       Reply  Tue Aug 24 20:06:16 2010, Zach, Laser, GYRO, Gyro "single-arm" test 
          Reply  Wed Aug 25 01:02:17 2010, rana, Laser, GYRO, Gyro "single-arm" test 
          Reply  Wed Aug 25 01:09:43 2010, Zach, Laser, GYRO, Gyro "single-arm" test single_leg_noise.png
Message ID: 980     Entry time: Wed Aug 25 01:02:17 2010     In reply to: 979
Author: rana 
Type: Laser 
Category: GYRO 
Subject: Gyro "single-arm" test 

Temperature noise may be a real problem. Probably Frank has a spectrum of the room's temperature noise handy and you can multiply by the CTE of the table top.

I guess the MZ noise and the gyro noise ought to be measured with the air on/off. I think it will point at the HVAC.

ELOG V3.1.3-