40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
Entry  Mon Aug 23 20:56:44 2010, Zach, Computing, GYRO, New channels acquired 
    Reply  Tue Aug 24 15:50:22 2010, Dmass, Computing, GYRO, New channels acquired 
       Reply  Tue Aug 24 16:47:41 2010, Zach, Computing, GYRO, New channels acquired 
Message ID: 974     Entry time: Tue Aug 24 15:50:22 2010     In reply to: 968     Reply to this: 975
Author: Dmass 
Type: Computing 
Category: GYRO 
Subject: New channels acquired 

 

  I used the GUI to add 6 channels. I logged into fb0 and did "sudo pkill daqd"

  • CTRL_ISS_1_OUT = IR PD diff
  • CTRL_ISS_2_OUT = Green diff
  • CTRL_SIG_1_OUT = IR sum
  • CTRL_SIG_2_OUT = Green sum
  • GENERIC_GEN3_OUT = NPRO power
  • GENERIC_GEN4_OUT = PMC Trans Power

I added all the above at 256 Hz (manually adding a 4th order butterworth to each channel at 128 Hz because of the decimation the DAQ uses)

 I had to manually click the "DAQ reload" button on the GDS_TP medm screen to make a funny desynch error dissapear.

The channels seem fine when compared to their fast testpoint counterparts.

ELOG V3.1.3-