40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
Entry  Thu Jul 29 12:09:56 2010, Alastair, Laser, GYRO, Seismometer Measurements Continued 10_07_29_seismic01.pdf
    Reply  Fri Jul 30 00:48:11 2010, Dmass, Laser, GYRO, Seismometer Measurements Continued 
Message ID: 876     Entry time: Thu Jul 29 12:09:56 2010     Reply to this: 880
Author: Alastair 
Type: Laser 
Category: GYRO 
Subject: Seismometer Measurements Continued 

I've added SR560s to all three channels of the seismometer now.  They're DC coupled with a gain of 100, low pass filter at 10k and I'm running them on battery to avoid grounding the seismometer outputs.  The manual says that the battery should last 20hours so we might need to use a different solution to get more data (I'm assuming we don't want to use the mini circuits bnc transformers for this since it's not RF?).

We are now well above the DAQ noise.  Here is a plot showing 10 averages of the vertical, N/S and E/W data plotted calibrated in volts (GPS 964463447).  We will now take seismic data for 24hours.  Setup completed at 11.40am July29.

Attachment 1: 10_07_29_seismic01.pdf  54 kB  Uploaded Thu Jul 29 13:11:36 2010  | Show | Show all
ELOG V3.1.3-