40m QIL Cryo_Lab CTN SUS_Lab CAML OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
 List  |  Find  |  Login  |  Help 
Entry  Tue May 18 09:43:55 2010, Aidan, Computing, DAQ, Killed the DAQD process. It restarted automatically. 
    Reply  Tue Jul 20 18:12:02 2010, Aidan, Computing, DAQ, Killed the DAQD process. It restarted automatically. 
       Reply  Wed Jul 21 13:59:29 2010, Dmass, Computing, DAQ, Killed the DAQD process. It restarted automatically. 
          Reply  Wed Jul 21 14:20:54 2010, Jenne, Computing, DAQ, Killed the DAQD process. It restarted automatically. 
             Reply  Wed Jul 21 20:08:53 2010, Dmass, Computing, DAQ, Killed the DAQD process. It restarted automatically. 
Message ID: 860     Entry time: Tue Jul 20 18:12:02 2010     In reply to: 777     Reply to this: 861
Author: Aidan 
Type: Computing 
Category: DAQ 
Subject: Killed the DAQD process. It restarted automatically. 

I killed and restarted the daqd process because I wanted to add some 16Hz TCS channels to the frame builder. These are from the Athena DAQ box.

I edited the following files:

  • on fb1: /cvs/cds/caltech/chans/daq/C4TCS.ini    -the .ini file telling the frame builder what channels to record
  • on tcs_daq: /target/TCS_westbridge.db  - added the names for the ADC inputs and DAC outputs for the Athena box

 

Quote:

I added some EPICS channels to the Hartmann sensor softIoc and then added these to be recorded in the frames.

I then killed the daqd process on fb1 so it would start afresh.

  • /cvs/cds/caltech/target/softIoc/HWS.db      - the file with the HWS EPICS channels
  • /cvs/cds/caltech/chans/daq/C4TCS.ini            - the .ini file telling the frame builder what channels to record.

 

ELOG V3.1.3-