|
40m
QIL
Cryo_Lab
CTN
SUS_Lab
CAML
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
| ATF eLog |
Not logged in |
 |
|
|
 Tue Jun 29 14:27:10 2010, Jenna, Laser, GYRO, Comparison of frequency noise and mechanical noise for the gyro cavity 
|
 Tue Jun 29 15:41:01 2010, Alastair, Laser, GYRO, Comparison of frequency noise and mechanical noise for the gyro cavity
| |
Tue Jun 29 17:48:31 2010, Zach, Laser, GYRO, Comparison of frequency noise and mechanical noise for the gyro cavity
| |
Wed Jun 30 00:35:28 2010, rana, Laser, GYRO, Comparison of frequency noise and mechanical noise for the gyro cavity
|
|
|
Message ID: 841
Entry time: Tue Jun 29 15:41:01 2010
In reply to: 840
Reply to this: 842
843
|
| Author: |
Alastair |
| Type: |
Laser |
| Category: |
GYRO |
| Subject: |
Comparison of frequency noise and mechanical noise for the gyro cavity |
|
|
It looks like the laser frequency noise will be slightly too high to measure the vibration of the mirrors in the cavity using the control signal for the locking, especially if our cavity is quieter than the MZ at the 40m (which we are hoping it will be). It would still be nice to get a measurement of the mechanical noise of the mirrors somehow.
| Quote: |
|
Here is a plot of laser frequency noise from a Lightwave NPRO 126 laser converted into m*Hz-1/2 for comparison with mechanical noise taken from the MZ at the 40m.
|
|