|
40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
| ATF eLog |
Not logged in |
 |
|
|
 Fri May 7 07:42:09 2010, Aidan, Lab Infrastructure, HVAC, Re-sealing and laser keys
|
 Fri May 7 10:16:24 2010, Zach, Lab Infrastructure, HVAC, Re-sealing and laser keys
| |
Fri May 7 11:10:17 2010, Alastair, Lab Infrastructure, HVAC, Re-sealing and laser keys
|
|
|
Message ID: 755
Entry time: Fri May 7 11:10:17 2010
In reply to: 754
|
| Author: |
Alastair |
| Type: |
Lab Infrastructure |
| Category: |
HVAC |
| Subject: |
Re-sealing and laser keys |
|
|
Sealing is done. They left the air on this time while doing it so they could get as many small leaks as possible. Anyway, that means that the air is still on in the lab and they have finished for good now.
| Quote: |
|
Gyro key is in the top drawer of the center workstation.
| Quote: |
|
The guys are back this morning to reseal the vents. There are some green marks around the place but also what looks like new red ones over the top of the silicon they laid down two weeks ago.
I shutdown the 35W laser using the 'System Off' option on the touch-screen and then turned off the NPRO and removed the key. That key is now in the second drawer down in the first desk. The key for the Gyro NPRO was not in the laser.
|
|
|