40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
Message ID: 716     Entry time: Tue Apr 6 21:06:21 2010
Author: Frank 
Type: Misc 
Category: Pulser 
Subject: diode damage tests 

Rich and me did some brainstorming this afternoon to identify possible parameters we wanna measure during/after pulsing the DUT

1.  Dark Current and Noise (can be done using the same high sensitive amplifier)
2.  Camera for physical damage
3.  Scatter (can be done with camera)
4.  I/V curve (including zener breakdown)
5.  Temperature (monitoring, to not destroy the device due to too high repetition rates of the pulses)
6.  Responsivity (or QE), relative changes
7.  Internal capacitance and resistance

ELOG V3.1.3-