Instructions on how to enable the alarm and heater shut off for the CTC100.
Status: This reports the status of the alarm. If LATCH is enabled, this must be manually set to OFF once it has been enabled.
Mode: Set to "Level"
Latch: Optional to set to "YES" if desired.
Output: Set to "Heater"
Max: Set to desired maximum temperature.
The attached photos show:
- the menu where the settings are ALARM entered
- the main display just before the alarm is enabled (at 300.350K with a 1s delay)
- the main display just after the alarm is enabled - note that the Heater Output has been set to 0W.
|