40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
ATF eLog |
Not logged in |
 |
|
|
Message ID: 2667
Entry time: Wed Sep 15 08:22:32 2021
In reply to: 2665
|
Author: |
Aidan |
Type: |
DailyProgress |
Category: |
Cryo vacuum chamber |
Subject: |
CONTAMINATION: Black paint flecks throughout chamber |
|
|
I was setting up for some characterization measurements of the JPL PD and I noticed that there are flecks of black paint all through the chamber. There were a couple of visible bare sections on the wall of the inner shield where paint had been removed.
Quote: |
Monday I completed the vent that Aidan had started by turning off the cryocooler. During the afternoon I turned off the pumps, unbolted the chamber lid, and removed the radiation shield lids.
Next, Aidan was going to run some characterization measurements and determine whether to swap the diode or repeat with A1.
|
|
|
|
|
|
|
|
|
|