40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
Message ID: 2499     Entry time: Fri Jul 24 04:54:57 2020
Author: Raymond 
Type: Lab Infrastructure 
Category: General 
Subject: MDF repair 

First day back (7/15) found the particle board trim w/ powerstrip on the QIL workbench had collapsed. Re-glued and added 4 screws to the middle board where vertical boards from the shelves extended low enough. See attached photos for before, during, and after looks. 

Attachment 1: MDFrepair_before.jpg  421 kB  Uploaded Fri Jul 24 06:06:12 2020  | Hide | Hide all
Attachment 2: MDFrepair_during.jpg  457 kB  Uploaded Fri Jul 24 06:06:41 2020  | Hide | Hide all
Attachment 3: MDFrepair_after.jpg  435 kB  Uploaded Fri Jul 24 06:07:01 2020  | Hide | Hide all
ELOG V3.1.3-