40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
Message ID: 2261     Entry time: Wed Nov 14 16:49:47 2018
Author: Rahul 
Type: Update 
Category: Cryo vacuum chamber 
Subject: assembly 

The top (seen with several threaded holes along with 16 through holes) and bottom (only 2 threaded holes for lifting and 16 through holes) plate for the vacuum chamber has arrived and I have moved them into the QIL optical bench/table. Using some aluminum struts/bosch, I am making a simple 3’’ tall spacer on top of which the bottom plater will be resting. After wiping them with solvents, I will start assembling the chamber and the plates.

Attachment 1: Bottom_plate.jpg  1.703 MB  | Hide | Hide all
Attachment 2: top_plate.jpg  1.461 MB  | Hide | Hide all
ELOG V3.1.3-