40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
Message ID: 1742     Entry time: Tue Aug 21 23:29:38 2012
Author: tara 
Type: Misc 
Category: TempCtrl 
Subject: thermal insulation for cold finger and EOM 

I made a thermal insulation box for the cell holder that will be used in iodine setupr, see ATF:1665. I used the similar style to CTN refcav insulation. We can make more space in the foam to hold more thermal sensors later. I'll see if I can test how good it can stabilize the temperature tomorrow.



Plus, I also made another thermal insulation for an EOM. It is based on what frank did inPSL:744. It can be used for Gyro or for CTN lab when I have to install two lasers later.


ELOG V3.1.3-