40m QIL Cryo_Lab CTN SUS_Lab CAML OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
Message ID: 1422     Entry time: Wed May 25 06:07:56 2011
Author: Zach 
Type: Electronics 
Category: GYRO 
Subject: PDH2 PCB layout 

All but finished with the all-new PCB layout for the PDH2. Still need to wire up the RF stuff and work out how we want the connections (these will be a mix of SMP and twisted pairs from the board to the front panel of the NIM module to avoid stress and over-specification). The open central region of the board is for the minicircuits mixer.


ELOG V3.1.3-