40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
Message ID: 134     Entry time: Sat May 23 16:04:57 2009
Author: Aidan 
Type: Laser 
Category: Fiber 
Subject: Blocking out FS experiment ... 

 I've started to to block out the parts for the fiber stabilization experiment as in the attached layout ... basically to check that everything is there.

Nothing is aligned and some of the lenses are just standing in right now. 

The photos show before and after for the table. I think we're going to need a rack or bench nearby for scopes, analyzers, power supplies, etc.

Attachment 1: Table_Layout_v1.0.jpg  904 kB  | Hide | Hide all
Table_Layout_v1.0.jpg
Attachment 2: photo.jpg  176 kB  | Hide | Hide all
photo.jpg
Attachment 3: photo1.jpg  163 kB  | Hide | Hide all
photo1.jpg
ELOG V3.1.3-