40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
Message ID: 130     Entry time: Fri May 15 17:32:30 2009
Author: Aidan 
Type: Computing 
Category: Fiber 
Subject: Started screen for Fiber Stabilization - and claiming CDS channels 

I'd like to use ADC channels 13-16 for the photodiodes in the FS experiment. Also going to use DAC channel 16 for feeding back to the AOM. We should decouple the signals on the MEDM screens so that you can't, inadvertantly, feed gyro error signals to the FS output.

Started work on a FS control screen (C2ATF_FS_CONTROL.adl shown below). It's accesible from the C2ATF_MASTER screen (also shown below). There won't be that much too it ... just an box allowing you to control the in-loop signals and the feedback to the frequency of the AOM. The lower box will simply be the input  signals from the out-of-loop PDs.

 

 

 

Attachment 1: Screenshot-C2ATF_FS_CONTROL.adl.png  14 kB  | Hide | Hide all
Screenshot-C2ATF_FS_CONTROL.adl.png
Attachment 2: Screenshot-C2ATF_MASTER.adl.png  11 kB  | Hide | Hide all
Screenshot-C2ATF_MASTER.adl.png
ELOG V3.1.3-