40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
 List  |  Find  |  Login  |  Help 
Entry  Wed Dec 15 15:41:45 2010, Alastair & Zach, Electronics, General, RFPD design RFPD_1.pdf
    Reply  Wed Dec 15 22:29:27 2010, Frank, Electronics, General, RFPD design 
       Reply  Wed Dec 15 22:36:05 2010, Alastair, Electronics, General, RFPD design 
    Reply  Thu Dec 16 03:50:33 2010, rana, Electronics, General, RFPD design: comments 
       Reply  Thu Dec 16 15:27:12 2010, Alastair, Electronics, General, RFPD design: comments 
       Reply  Fri Dec 17 22:07:00 2010, Alastair, Electronics, General, RFPD design: comments 
Message ID: 1219     Entry time: Wed Dec 15 22:29:27 2010     In reply to: 1216     Reply to this: 1220
Author: Frank 
Type: Electronics 
Category: General 
Subject: RFPD design 

you don't wanna have 4 power supplies to power the detector, way too complicated. I would change it to power the entire thing by +/-24V and regulate that to +/-15V. Then use the already regulated +/-15V to regulate it down to something else in addition.

 

 Here is our layout for the RFPD in Altium.  We are working on routing the board now.

 

ELOG V3.1.3-