40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
Entry  Sun Nov 7 21:47:10 2010, rana, Computing, Computing, fb0/fb1 user ID and group ID changed to controls=1001 
    Reply  Mon Nov 8 17:26:38 2010, rana, Computing, Computing, fb0/fb1 user ID and group ID changed to controls=1001 
       Reply  Mon Nov 8 22:37:33 2010, rana, Computing, Computing, fb0/fb1 user ID and group ID changed to controls=1001 Untitled.png
Message ID: 1151     Entry time: Mon Nov 8 17:26:38 2010     In reply to: 1145     Reply to this: 1152
Author: rana 
Type: Computing 
Category: Computing 
Subject: fb0/fb1 user ID and group ID changed to controls=1001 

I changed over the user/group ownership of the /frames subdirectories to controls for both fb0 and fb1. Lets see if this is correct.

I also updated the firmware on the linsys router, turned off uPnP, and also turned off DHCP (as a test). I've been noticing that what happens

lately is that the connection to the outside world just goes away sometimes and then comes back after a few minutes. This along with

the fact that our bandwidth to our own LIGO network is only 600 kB/s makes me think that the issue is on Larry's side of the table.

ELOG V3.1.3-