40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  ATF eLog  Not logged in ELOG logo
Entry  Wed Sep 8 17:51:15 2010, Alastair & Zach, Laser, GYRO, Windows are in photo_3.jpgphoto_4.jpgphoto_2.JPGphoto_5.JPG
    Reply  Wed Sep 8 18:13:26 2010, Alastair & Zach, Laser, GYRO, Windows are in 
Message ID: 1025     Entry time: Wed Sep 8 17:51:15 2010     Reply to this: 1026
Author: Alastair & Zach 
Type: Laser 
Category: GYRO 
Subject: Windows are in 

 We installed the four CVI W2 windows on the box this afternoon.  We decided that to do the best job we would remove each side of the box so that the lens mounts could be put in place on a flat surface.

The sealant that we used was RTV108 which had very little smell as we were applying it.  As you can see from picture 2, it went on pretty smoothly and I'm confident that all windows are sealed nicely.  After leaving it to set for ~30mins the windows were installed and the box put back together round the cavity mirrors.

Unfortunately our best efforts at not moving anything have still resulted in the cavity becoming mis-aligned.  It is probably as a result of un-dog-clamping the box from the table and then re-clamping it again.  Working on realignment right now.

Attachment 1: photo_3.jpg  87 kB  | Hide | Hide all | Show all
photo_3.jpg
Attachment 2: photo_4.jpg  75 kB  | Hide | Hide all | Show all
photo_4.jpg
Attachment 3: photo_2.JPG  45 kB  | Show | Hide all | Show all
Attachment 4: photo_5.JPG  89 kB  | Hide | Hide all | Show all
photo_5.JPG
ELOG V3.1.3-