40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  Mariner elog  Not logged in ELOG logo
Entry  Mon Jul 18 18:34:29 2022, Paco, General, Design specs, HR coating update ETM_R.pdfITM_R.pdfETM_Layers.pdfITM_Layers.pdf
    Reply  Fri Jul 22 13:36:55 2022, Paco, General, Design specs, HR coating update ETM_corner.pdfITM_corner.pdf
       Reply  Tue Aug 16 09:58:23 2022, Paco, General, Design specs, HR coating update 6x
          Reply  Tue Aug 23 17:10:50 2022, Paco, General, Design specs, New corner plots ITM_corner.pdfETM_corner.pdf
Message ID: 76     Entry time: Tue Aug 16 09:58:23 2022     In reply to: 68     Reply to this: 78
Author: Paco 
Type: General 
Category: Design specs 
Subject: HR coating update 

A couple of coating stacks with better tolerance (transmission +- 10%). Attachments #1-2 show the spectral reflectivities for ETM/ITM respectively, while Attachments #3-4 show the corner plots. I think the tolerances are inflated by the fact that all the stack indices and thicknesses are varying, while in reality these two effects are degenerate because what matters is the optical thickness. I will try to reflect this in the MCMC code next. Finally, attachments # 5-6 are the hdf5 files with the optimization results.

Attachment 1: ETM_R_220816_094640..pdf  23 kB  Uploaded Tue Aug 16 11:01:17 2022  | Hide | Hide all
ETM_R_220816_094640..pdf
Attachment 2: ITM_R_220816_095441..pdf  23 kB  Uploaded Tue Aug 16 11:01:31 2022  | Hide | Hide all
ITM_R_220816_095441..pdf
Attachment 3: ETM_corner.pdf  623 kB  Uploaded Tue Aug 16 11:01:45 2022  | Hide | Hide all
ETM_corner.pdf
Attachment 4: ITM_corner.pdf  619 kB  Uploaded Tue Aug 16 11:01:57 2022  | Hide | Hide all
ITM_corner.pdf
Attachment 5: ETM_Layers_220816_094640.hdf5  334 kB  Uploaded Tue Aug 16 11:02:26 2022
Attachment 6: ITM_Layers_220816_095441.hdf5  524 kB  Uploaded Tue Aug 16 11:02:37 2022
ELOG V3.1.3-