40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  Cryo Lab eLog  Not logged in ELOG logo
Entry  Thu Feb 25 14:21:35 2021, aaron, DailyProgress, ,  
    Reply  Fri Feb 26 10:26:05 2021, Chris, DailyProgress, DAQ,  
    Reply  Fri Feb 26 11:52:31 2021, rana, Computing, DAQ, Cymac & Matlab 
Message ID: 2668     Entry time: Fri Feb 26 11:52:31 2021     In reply to: 2665
Author: rana 
Type: Computing 
Category: DAQ 
Subject: Cymac & Matlab 

I would advise against using the latest Matlab. The RT CDS stuff uses Simulink for editing the .mdl model files, but they switched to .slx a few years ago and I,m not sure if the modern one is supported by CDS yet. Best to ask Chris/Jon what the officially supported one is and make sure thot the cryo workstations use that one by default.

Quote:
 
  • downloaded Matlab 2020b (!!) from Caltech imss onto Spirou
  • When I open it, am alerted that the following directories are missing:
    • /opt/rtcds/userapps/local
      /opt/rtcds/rtscore/release/src/epics/simLink
      /opt/rtcds/rtscore/release/src/epics/simLink/lib

 

ELOG V3.1.3-