40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Entry  Mon Apr 16 16:21:01 2012, tara, Notes, optic, windows for vacuum chamber 
    Reply  Tue Apr 17 19:51:54 2012, tara, Notes, optic, windows for vacuum chamber IMG_0757.jpg
       Reply  Thu Apr 19 03:12:23 2012, tara, Notes, optic, windows for vacuum chamber 
          Reply  Sun Apr 22 23:09:38 2012, tara, Notes, optic, windows for vacuum chamber 
             Reply  Mon Apr 23 16:52:16 2012, tara, Notes, optic, windows for vacuum chamber 
                Reply  Wed Apr 25 10:44:29 2012, Frank, Notes, optic, windows for vacuum chamber 
                   Reply  Thu Apr 26 08:35:57 2012, steve, Notes, optic, windows for vacuum chamber 
                      Reply  Fri Apr 27 08:46:24 2012, Frank, Notes, optic, windows for vacuum chamber 
                         Reply  Tue May 1 20:37:16 2012, tara, Notes, optic, windows for vacuum chamber 
                            Reply  Fri May 11 17:52:17 2012, tara, Notes, optic, windows for vacuum chamber O-Rings.pdf.zip
                               Reply  Wed May 16 22:27:13 2012, tara, Notes, optic, windows for vacuum chamber 2_small_window.PDFblank_10_wedge.PDF
                                  Reply  Mon May 21 16:53:38 2012, tara, Notes, optic, windows for vacuum chamber edit_blank_10_wedge.PDFwindow_assembly.PDFwindow_assembly2.PDF
                                     Reply  Wed May 23 15:04:53 2012, steve, Notes, optic, windows for vacuum chamber 
Message ID: 971     Entry time: Wed May 23 15:04:53 2012     In reply to: 969
Author: steve 
Type: Notes 
Category: optic 
Subject: windows for vacuum chamber 

 

 2"  optics with 2 degrees of wedge will have 0.375" thickness as std - get optics specification now

I thought about the design after talking to you yesterday:

a, use standard 3 3/8" od  flange for your windows

b, the 2 degrees of off- set into the 10" cf design will have to be assembled in horizontal position so the teflon gaskit would stay in place

c, the vertical assembly requires that you put the 2 degrees off-set into the 3.37" flange ( one side CF - the other o-ring groove) and delrin cover plate on top of it

ELOG V3.1.3-