40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Entry  Mon Apr 23 22:06:14 2012, tara, Notes, Purchases, vibration isolators (table legs) IMG_0805.jpgIMG_0809.jpg
    Reply  Wed Apr 25 10:23:34 2012, Frank, Notes, Purchases, vibration isolators (table legs) 
       Reply  Thu Apr 26 12:15:13 2012, Frank, Notes, Purchases, vibration isolators (table legs) Quotation_1058227_for_CALIFORNIA.pdf
          Reply  Thu Apr 26 16:57:33 2012, steve, Notes, Purchases, vibration isolators (table legs) in 40m 
             Reply  Fri Apr 27 08:57:38 2012, steve, Notes, Purchases, vibration isolators (table legs) in 40m 
    Reply  Tue Oct 9 15:12:57 2012, tara, Notes, Purchases, vibration isolators (table legs) 
Message ID: 937     Entry time: Wed Apr 25 10:23:34 2012     In reply to: 933     Reply to this: 941
Author: Frank 
Type: Notes 
Category: Purchases 
Subject: vibration isolators (table legs) 

We have "Pneumatic Vibration Isolators with Automatic Re-leveling". Height is 16in from top to bottom, so that would raise the table height by 2.5in which i think is not gonna be a problem as i'm pretty sure we can adjust the height of the horizontal beams of the frame and don't have other constraints except the clearance of the ion pump to the HEPA which should be fine. Do you have a price for the 16" ones? (S-2000A-416). The problem with the new legs could be how to mount the table to them. The mounting looks different (diameter, holes etc.)

We should probably consider using the newer version we have currently under the cryo table and the table in the richter lab. Using those would eliminate the need of working on our frame and those tables don't really care what legs they are using at the moment.

Quote:

I'm looking for the new table legs. The height will be 13.5". The plate that connects to the table will have 3 holes, 4" inches away from the center. I need to check what is the weight of the table and if the new legs can be mounted with the table  or not. 

For New port legs, (set of 4), the price are around $2500 (can be cheaper for less weight requirement). I'll check what is the weight of our table.

      They also offer Pneumatic Vibration Isolators with Automatic Re-leveling legs (I don't know what are the differences), but the height are wrong for our setup, the shortest one starts at 16" height. I looked into this category because our current legs also say Pneumatic

 

ELOG V3.1.3-