40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Entry  Mon Apr 23 22:06:14 2012, tara, Notes, Purchases, vibration isolators (table legs) IMG_0805.jpgIMG_0809.jpg
    Reply  Wed Apr 25 10:23:34 2012, Frank, Notes, Purchases, vibration isolators (table legs) 
       Reply  Thu Apr 26 12:15:13 2012, Frank, Notes, Purchases, vibration isolators (table legs) Quotation_1058227_for_CALIFORNIA.pdf
          Reply  Thu Apr 26 16:57:33 2012, steve, Notes, Purchases, vibration isolators (table legs) in 40m 
             Reply  Fri Apr 27 08:57:38 2012, steve, Notes, Purchases, vibration isolators (table legs) in 40m 
    Reply  Tue Oct 9 15:12:57 2012, tara, Notes, Purchases, vibration isolators (table legs) 
Message ID: 933     Entry time: Mon Apr 23 22:06:14 2012     Reply to this: 937   1057
Author: tara 
Type: Notes 
Category: Purchases 
Subject: vibration isolators (table legs) 

I'm looking for the new table legs. The height will be 13.5". The plate that connects to the table will have 3 holes, 4" inches away from the center. I need to check what is the weight of the table and if the new legs can be mounted with the table  or not. 

For New port legs, (set of 4), the price are around $2500 (can be cheaper for less weight requirement). I'll check what is the weight of our table.

      They also offer Pneumatic Vibration Isolators with Automatic Re-leveling legs (I don't know what are the differences), but the height are wrong for our setup, the shortest one starts at 16" height. I looked into this category because our current legs also say Pneumatic

IMG_0809.jpg 

 

IMG_0805.jpg

ELOG V3.1.3-