40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Message ID: 71     Entry time: Mon Feb 22 11:25:51 2010
Author: Frank 
Type: Laser 
Category: Laser 
Subject: laser fault again 

the laser stopped working while beeing in the lab but not touching the laser or table or anything. I was looking for an EOM mount and suddenly the chiller beeped. The power supply stopped working with a "PS error" message, but the more interesting fact is that the setpoint of the chiller was changed to 15degC (my guess is from the PS), but it should be at 26.5degC. So maybe the PS is also causing the freezing of the chiller, simply sending the wrong setpoint values when having a fault...

ELOG V3.1.3-