40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Message ID: 660     Entry time: Thu Aug 18 23:12:42 2011
Author: Raphael 
Type: Summary 
Category: FSS 
Subject: simulink just about done. Feedback appreciated. 

So over the whole summer, I've put together, little by little, the simulink model for the path that locks the laser to the reference cavity. I'm going to attach the matlab files in a zip folder. I've tried my best to comment as best as possible and to make the programs as robust as I could possibly think of.

I am also attaching the LISO models to the TTFSS paths and for the fits to the measured PZT and EOM Actuator transfer functions. I'm going to list the links of past elogs that refer that mention these fits. I'm also going to attach the fits themselves.


EOM Actuator Measurement Procedure

PZT and EOM Actuators Fit

A more complete description of my measurements can be found in my surf report

I am still not satisfied with these fits and would like some feedback in improving them. I am most worried about my measured EOM Actuator transfer function fit.

Attachment 1: fss_simulink.zip  12 kB
Attachment 2: fss_LISO.zip  3 kB
Attachment 3: eom_measured_vs_fitted.jpg  116 kB  | Hide | Hide all
Attachment 4: PZT_TF_measured_vs_fitted.jpg  219 kB  | Hide | Hide all
Attachment 5: PZT_Actuator_Gain_measured_vs_fitted.jpg  228 kB  | Hide | Hide all
Attachment 6: PZT.jpg  279 kB  | Hide | Hide all
Attachment 7: EOM.jpg  341 kB  | Hide | Hide all
Attachment 8: EOMHV.jpg  334 kB  | Hide | Hide all
ELOG V3.1.3-