40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Entry  Thu Jul 21 18:03:20 2011, tara, DailyProgress, AOM, AOM adaptor plate,  aom_base1.PDFaom_base2.PDFeom_block1.PDFeom_block2.PDF
    Reply  Fri Jul 22 16:31:12 2011, tara, DailyProgress, AOM, AOM adaptor plate aom_base.PDFeom_block1.PDFeom_block2.PDF
Message ID: 633     Entry time: Thu Jul 21 18:03:20 2011     Reply to this: 635
Author: tara 
Type: DailyProgress 
Category: AOM 
Subject: AOM adaptor plate,  

I made drawings for aom block and adaptor plate. The assembly is for 3" beam height.

 

The assembly is consisted of two parts. The bottom aluminum part is for mounting new focus 9071 4 axis stage on the table.

The top plastic part, is for mounting an AOM to the 4-axis stage.

 

The bottom part actually is designed for a standard EOM, so the height is  3". With a plastic adaptor plate, it can be used for an AOM as well, so I'll order a few of the alumnium parts.

 

There are 2 designs for AOM adaptor parts, because we have two AOM models. They have different screw size and mounting positions, I 'll order a couple for each design. 

 

Attachment 1: aom_base1.PDF  54 kB  | Hide | Hide all
aom_base1.PDF
Attachment 2: aom_base2.PDF  54 kB  | Hide | Hide all
aom_base2.PDF
Attachment 3: eom_block1.PDF  51 kB  | Hide | Hide all
eom_block1.PDF
Attachment 4: eom_block2.PDF  56 kB  | Hide | Hide all
eom_block2.PDF
ELOG V3.1.3-