40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Entry  Fri Apr 15 18:59:41 2011, tara, DailyProgress, FSS, Preparing to install TTFSS 
    Reply  Tue Apr 19 22:40:03 2011, tara, DailyProgress, FSS, Preparing to install TTFSS 
       Reply  Wed Apr 20 17:54:52 2011, tara, DailyProgress, FSS, Preparing to install TTFSS 000_0025.jpg000_0024.jpg000_0023.jpgfastout.png
          Reply  Sat Apr 23 11:40:09 2011, tara, DailyProgress, FSS, Preparing to install TTFSS TTFSS_cartoon.pdf
             Reply  Sun Apr 24 22:02:07 2011, tara, DailyProgress, FSS, Preparing to install TTFSS beat_2011_04_24.pngbeat_2011_04_24.png
                Reply  Mon Apr 25 17:53:20 2011, tara, DailyProgress, FSS, Preparing to install TTFSS beat_2011_04_25.png
Message ID: 584     Entry time: Tue Apr 19 22:40:03 2011     In reply to: 583     Reply to this: 585
Author: tara 
Type: DailyProgress 
Category: FSS 
Subject: Preparing to install TTFSS 

 

 All cables and power supplies for the new TTFSS are ready. I'll fire it up tomorrow.

 

 With Peter help, +/- 200V power supply is ready. I'll use the same power supply for the current FSS. I removed the cable for the current FSS, and installed the cable for the new TTFSS.

+/- 24V is already in used, I just added the connector for TTFSS on top of it.

+/-17V is prepared for temporary solution. I used two HP DC power supplies. There are two available KEPCO power supplies on the racks, but I could not turn them on for now. I have to find the manual and read it first.

ELOG V3.1.3-