40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Message ID: 514     Entry time: Thu Feb 24 16:36:06 2011
Author: Frank 
Type: Summary 
Category: Laser 
Subject: PMC re-aligned, EOAM re-alligned , power adjusted 

I re-aligned the PMC, same for the electro-optic amplitude modulator (EOAM). I also adjusted the power levels everywhere up to the PMC for maximum performance.

I also had to re-adjust the PMC phase. Startup-setting was 2.29V but had to be 3.29V! Error signal is 2.46Vpp at mixer mon.

Power is set to 20mW transmitted through the PMC when modulation is off. Power can be adjusted behind the PMC as it was setup before.
Power modulation is +/-1.5mW around 20mW with max on function generator (~15%).

ELOG V3.1.3-