40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Message ID: 475     Entry time: Mon Feb 7 16:14:19 2011
Author: Frank 
Type: Notes 
Category: BEAT 
Subject: cable phase noise measurement calibration 

used two frequency ranges to calibrate the mixer signal

  1. calibration factor is 6.85MHzpkpk measured between 150MHz and 160MHz
  2. calibration factor is 6.42MHzpkpk measured between 147MHz and 154MHz

those numbers should be sufficient for comparison with the VCO feedback signal.

ELOG V3.1.3-