after some trouble with fluctuating temperatures and a brocken cable to the vco i could finally lock both cavities. So now we can take first data.
temperatures are still fluctuating and the software loops have to be optimized for the new thermal insulation. Currently only a p-servo is running and the channel names have to be finalized...
slow actuator signal: C:PSL-FSS_SLOWDC
room temp: C3:PEM-SENS1_TEMP
actuator signal: C:PSL-FSS_HEATER
temp signal: C:PSL-FSS_MINCOMEAS
actuator signal: C3:PSL-GEN_D2A1
temp signal: C3:PSL-GEN_DAQ1