40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Message ID: 359     Entry time: Tue Sep 14 11:52:34 2010
Author: tara 
Type: Notes 
Category: FSS 
Subject: FSS servo debugging 

After I increased the pk-pk of the error signal for RCAV system (by increasing the RF power to maximum), 

 C3:PSL-FSS_FAST is still railing once it goes below ~ -2 V kicking the system out of lock.

I'll check again if the laser is lock to the center of the error signal or not.

ELOG V3.1.3-