40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Entry  Thu Sep 4 19:39:36 2014, Tara, Evan, DailyProgress, FSS, TTFSS OLTFs pdhTFs.pdf
    Reply  Sun Sep 7 11:54:21 2014, Evan, DailyProgress, FSS, TTFSS OLTFs, residual frequency noise pdhTFs.pdfoltfNorth.pdfoltfSouth.pdffrnoise.pdfnoiseBudget.pdf
       Reply  Mon Sep 8 04:20:41 2014, rana, DailyProgress, FSS, TTFSS OLTFs, residual frequency noise 
       Reply  Wed Oct 2 19:09:31 2019, anchal, DailyProgress, FSS, TTFSS OLTFs; Repeated this 5 year old measurement FSS_OLTF.pdf
          Reply  Thu Jan 9 19:00:19 2020, anchal, DailyProgress, FSS, TTFSS OLTFs FSS_OLTF.pdf
             Reply  Wed Jan 22 14:16:28 2020, anchal, DailyProgress, FSS, TTFSS OLTFs FSS_OLTF.pdf
                Reply  Wed Jan 22 16:00:26 2020, anchal, DailyProgress, FSS, TTFSS OLTFs with Maximum Gain FSS_OLTF.pdf
                   Reply  Thu Jan 23 19:23:03 2020, anchal, DailyProgress, FSS, NFSS Boost Stage NorthFSSBosstStageTF.pdf
Message ID: 2518     Entry time: Thu Jan 23 19:23:03 2020     In reply to: 2517
Author: anchal 
Type: DailyProgress 
Category: FSS 
Subject: NFSS Boost Stage 

Today Koji came to the lab to help me out with the FSS and give me few tips.

We made some changes to the boost stage at U7 in North FSS Box board D040105-C. All the changes were made by Koji personally. He replaced Koji showed me how to solder wires and SMD components so that I can do it better next time. We soldered the wires for the boost switch, replaced the resistor R29 with a thin film 5.6 kOhm resistor and replaced the capacitor (however the older capacitor was fine too). Overall, we made the arrangement of the components neater in the stage.

We figured that the only way to measure the transfer function of this stage when boost is on is to provide some reasonable offset as well so that the opamp doesn't saturate at DC. Hence, I do not have a good measurement of the stage before the changes were made. But after the touch-up, the stage is very close to the expectation as shown in the plot.


Data


Relevant elog posts:

CTN:2384 : Mentioned that something is wrong with the boost stage. But It was just the issue of measuring it wrong.

Attachment 1: NorthFSSBosstStageTF.pdf  37 kB  | Hide | Hide all
NorthFSSBosstStageTF.pdf
ELOG V3.1.3-