40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
 List  |  Find  |  Login  |  Help 
Entry  Mon Aug 19 15:54:51 2019, anchal, Summary, TempCtrl, Vac Can Heater Driver not working! VacCanInloopTemp.pdf
    Reply  Tue Aug 20 19:38:36 2019, anchal, Summary, Computers, Framebuilder re-configured 
    Reply  Wed Aug 21 10:28:58 2019, anchal, Summary, TempCtrl, Vacuum Can Step Response VacCanInloopTempDecayFit.pdf
Message ID: 2396     Entry time: Tue Aug 20 19:38:36 2019     In reply to: 2394
Author: anchal 
Type: Summary 
Category: Computers 
Subject: Framebuilder re-configured 

I updated ctn_scripts\channelFramebuilderConfigFileCreator.py to work with the new format of modbus hosting through docker (and cleaned it a bit). Also, from now on, C3CTN.ini will stay in the ctn_scripts repo to have version control.

I have run this once and followed instructions from CTN:2014 to restart frambuilder daqd process so that all new channels are logged as well.

Quote:

I found out that FB4 is not recording the channels that I have added later. I need to look into this as well.
ELOG V3.1.3-