40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Entry  Sat Feb 17 18:04:53 2018, Craig, DailyProgress, Mode matching, Set up beam profiler for North path mode matching NorthPathGeneralSetup.jpgSecondNorthPathSteeringMirror.jpgBeamProfilerInstalled.jpgFirstBeamProfilerDataPoint.jpg
    Reply  Fri Feb 23 07:51:51 2018, rana, DailyProgress, Mode matching, emcee Hammer my mode 
       Reply  Fri Feb 23 20:44:12 2018, Craig, DailyProgress, Mode matching, emcee Hammer my mode MCMCAlamodeOptimizedModeMatchingSolutionXAxis.pngNorthPathModeMatchingMCMC.tar
          Reply  Sat Feb 24 21:25:08 2018, rana, DailyProgress, Mode matching, emcee Hammer my mode 
             Reply  Tue Feb 27 03:25:34 2018, rana, DailyProgress, Mode matching, emcee Hammer my mode 
Message ID: 2102     Entry time: Fri Feb 23 07:51:51 2018     In reply to: 2096     Reply to this: 2104
Author: rana 
Type: DailyProgress 
Category: Mode matching 
Subject: emcee Hammer my mode 

This fragility of MM is one of those things we ought to develop a MCMC for. Jenne did something like this for the 40m input mode matching a long time ago, but that was before I understood what corner plots were for.

I wonder if JamMT or alaMode have the ability to be run to generate corner plots. If so, we could find out the sensitivity to lens positions and lens focal length errors in a visually useful way for each mode matching solution (generated from the discrete set of available focal lengths in the CVI catalog).

Might be a project to give to the CTN SURF this summer.

ELOG V3.1.3-