40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Message ID: 197     Entry time: Wed Jul 7 01:02:06 2010
Author: tara 
Type: DailyProgress 
Category: Laser 
Subject: Laser driver is stationed on the electronic rack 

I moved the laser driver to the electronic rack and it should stay there for the final setup.

A cable for interlock is made and connected to the laser driver.

A cable for slow actuator is also made and connected. Now we can use the medm FSS screen instead of the voltage calibrator

to adjust the NPRO's temperature (slow actuator.)


I went to 40m lab for a measurement



ELOG V3.1.3-