40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Entry  Thu Jun 22 14:55:37 2017, awade, Misc, Electronics Equipment, 30A @ 125 V plug install for UPS 
    Reply  Thu Jul 6 15:54:25 2017, awade, DailyProgress, Electronics Equipment, 30A @ 125 V plug install for UPS + rack mounting 
Message ID: 1842     Entry time: Thu Jul 6 15:54:25 2017     In reply to: 1841
Author: awade 
Type: DailyProgress 
Category: Electronics Equipment 
Subject: 30A @ 125 V plug install for UPS + rack mounting 

UPS supply 30A plug is installed in the PSL lab in the corner by the rack.  Port 058B/38.

The supply came with a rack mounting kit but it only attaches at the front; all the load of the ~40 kg unit is held on four screws which is not good.

TODO: order 2x extruded aluminum L pieces (90 degree angle) to support weight (dimensions 2ft x 2" x 2").

I couldn't find what I was looking for on the computer/enterprise punch outs on Techmart but McMaster sells 90 degree angle 2"x2"x2' lengths that are pretty much what we have now: 

https://www.mcmaster.com/#8982k14/=18dvdxq just need to drill some holes in the right place for our rack.

ELOG V3.1.3-