40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Message ID: 1837     Entry time: Wed May 24 14:58:45 2017
Author: Aidan 
Type: Summary 
Category: PMC 
Subject: PMC driver board chassis and Acromag 

I've pulled the old PMC driver board from the VIM crate architecture and inserted it into a chassis (D1700003). The interface has been reconfigured to insert directly into two Acromag units that are inside the chassis (see attached photo). It still needs a back panel.

So far, the DAC connections (loop gain control and locking point control) are wokring. The binary outputs are not properly switching between 0V and 5V - I'll need to double-check what circuit the Acromag 1541 is expecting to be attached.

Also, I've added a new EPICS database file for these channels (attached).



Attachment 1: IMG_9746.JPG  696 kB  | Hide | Hide all
Attachment 2: PMCControls.db.zip  1 kB  Uploaded Fri Jul 28 12:13:28 2017
ELOG V3.1.3-