Summary of channels active in the current PSL lab configuration. The .db file is also attached below.
We are almost full for input channels. Also if we wanted to implement an EPICS interface for the FSS control boxes we would need a total of 8 output channels.
List of all the current channels:
| Input Channels |
| record(calc, "C3:PSL-ACAV_TRANS_ISS_DC") |
| record(calc, "C3:PSL-RCAV_TRANS_ISS_DC") |
| record(calc, "C3:PSL-BEAT_DC") |
| record(calc, "C3:PSL-ACAV_FSS_FASTMON") |
| record(calc, "C3:PSL-RCAV_FSS_FASTMON") |
| record(calc, "C3:PSL-ACAV_REFL_DC") |
| record(calc, “C3:PSL-RCAV_REFL_DC") |
| record(calc, "C3:PSL-VACTEMP_MON1") |
| Output channels |
| record(ai, "C3:PSL-ACAV_FSS_SLOWOUT") |
| record(ai, "C3:PSL-RCAV_FSS_SLOWOUT") |
| Binary outputs |
| record(bo, "C3:PSL-ACAV_TEST_EN") |
| record(bo, "C3:PSL-RCAV_TEST_EN") |
| Temperature channels |
| record(ai, "C3:ACROMAG_TEMP4") |
| record(calc, "C3:PSL-VacCanTemp") |
| South PID controls soft channels |
| record(bi, "C3:PSL-ACAV_FSS_SLOWPID_EN") |
| record(ai, "C3:PSL-ACAV_SLOWFSS_SETPOINT") |
| record(ai, "C3:PSL-ACAV_FSS_SLOWPID_KP") |
| record(ai, "C3:PSL-ACAV_FSS_SLOWPID_KI") |
| record(ai, "C3:PSL-ACAV_FSS_SLOWPID_KD") |
| record(ai, "C3:PSL-FSS_SLOWPID_TIMEOUT") |
| record(bo, "C3:PSL-ACAV_FSS_SLOWPID_BLINK") |
| North PID controls soft channels |
| record(bi, "C3:PSL-RCAV_FSS_SLOWPID_EN") |
| record(ai, "C3:PSL-RCAV_SLOWFSS_SETPOINT") |
| record(ai, "C3:PSL-RCAV_FSS_SLOWPID_KP") |
| record(ai, "C3:PSL-RCAV_FSS_SLOWPID_KI") |
| record(ai, "C3:PSL-RCAV_FSS_SLOWPID_KD") |
| record(bo, "C3:PSL-RCAV_FSS_SLOWPID_BLINK") |
|