Edit: Datasheet was removed.
We have some kapton heaters, I found them in a draw when cleaning. These should be useful for our new shield temperature control.
These are from the kit KH-KIT-EFH-15001. I don't know how old they are or if Kapton stickiness goes off, but here is a list of remaining available sick on resistive heaters and their Ohmage:
Kapton resistive heaters in stock
| Quantity |
Dimensions |
Resistance [Ohm] |
Shape |
| 1 |
0.75"x2.5" |
23.5 |
Rectangular |
| 1 |
0.75"x3.25" |
33.2 |
Rectangular |
| 1 |
1"x3" |
40 |
Rectangular |
| 2 |
2"x3" |
103.7 |
Rectangular |
| 2 |
2.5"x2.5" |
108.6 |
Rectangular |
| 2 |
1.5"x8" |
252.0 |
Rectangular |
| 3 |
3"x3" |
153.7 |
Rectangular |
| 1 |
1.5"x4.5" |
120.3 |
Rectangular |
| 1 |
6"x1" |
? |
Rectangular |
| 2 |
1.5"D |
32.8 |
Circular |
| 1 |
2"D |
59.4 |
Circular |
| 1 |
3"D |
169.0 |
Circular |
Data sheet is attached. Note that heating ranges from 3-8 W per square inch at the 12 V supply level for various different choices of shape and wire pattern.
|