40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Message ID: 1657     Entry time: Fri Jul 1 19:50:05 2016
Author: awade 
Type: DailyProgress 
Category: Mode matching 
Subject: Faraday isolator south path at non-standard height 

I had some stuff to write up about modematching in the south path. But after looking in the far field I realised there was some clipping somewhere.  It turns out that the Farday is mounted slightly too high for our standard 3" height.  I will switch it out presently and continue matching the path with a FI with a slightly lower height.  

We should probably look getting the mount machiened down by about 1 mm.

ELOG V3.1.3-