40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Entry  Tue Mar 22 16:29:04 2016, tara, DailyProgress, PMC, Epoxy glue on PMC mirror and PZT 
    Reply  Thu Mar 24 19:07:38 2016, tara, DailyProgress, PMC, Epoxy glue on PMC mirror and PZT 
       Reply  Sat Mar 26 13:36:09 2016, tara, DailyProgress, PMC, Epoxy glue on PMC mirror and PZT IMG_2468.JPGIMG_2466.JPG
          Reply  Tue Mar 29 23:23:37 2016, rana, DailyProgress, PMC, Epoxy glue on PMC mirror and PZT 
             Reply  Wed Mar 30 08:29:15 2016, tara, DailyProgress, PMC, test on new PMC IMG_2528.JPGIMG_2540.JPG
                Reply  Wed Mar 30 10:28:44 2016, Evan, DailyProgress, PMC, test on new PMC 
                   Reply  Thu Mar 31 15:11:27 2016, tara, DailyProgress, PMC, test on new PMC 
                      Reply  Tue Apr 5 16:32:36 2016, tara, DailyProgress, PMC, test on new PMC 
                         Reply  Wed Apr 6 15:02:50 2016, tara, DailyProgress, PMC, test on new PMC 
                            Reply  Fri Apr 8 09:44:49 2016, tara, DailyProgress, PMC, test on new PMC IMG_2634.JPGIMG_2635.JPGIMG_2633.JPG
Message ID: 1619     Entry time: Wed Mar 30 10:28:44 2016     In reply to: 1617     Reply to this: 1620
Author: Evan 
Type: DailyProgress 
Category: PMC 
Subject: test on new PMC 

Wow, nicely done!

For posterity, the design document is on the DCC: T1600071

The vendor report for the optics is here: Q1600019

I'm a little surprised at the finesse. The design value was 300. This should be set by the reflectivities of the flat mirrors, which are each supposed to be 99% ± 0.1% for p polarization.

ELOG V3.1.3-