40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
Entry  Fri May 28 20:46:14 2010, tarac, Laser, Laser, Progress on PSL: Aligning RefCav 
    Reply  Sat May 29 12:01:17 2010, Frank, Laser, Laser, Progress on PSL: Aligning RefCav 
Message ID: 134     Entry time: Fri May 28 20:46:14 2010     Reply to this: 135
Author: tarac 
Type: Laser 
Category: Laser 
Subject: Progress on PSL: Aligning RefCav 

 Since the frequency of the laser going into RefCav is determined by PMC ,I decided to temporarily remove the PMC for now, so I can scan the laser frequency while aligning RefCav.

It might not be a good idea since the PMC might alter the beam path a little bit, but I just want to align the cavity first.

The plan is after  RefCav is aligned, I'll bring back the PMC and fine tune the beam going to RefCav again.

I still got many higher order modes coming out of the cavity.

 

ELOG V3.1.3-