40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  PSL  Not logged in ELOG logo
 List  |  Find  |  Login  |  Help 
Entry  Sun Feb 24 01:16:26 2013, tara, DailyProgress, RefCav, refcav and mount assembly photo(9).JPGphoto(8).JPG
    Reply  Mon Feb 25 01:02:58 2013, tara, DailyProgress, Vacuum, Heater for refcav heater.pngphoto(10).JPG
       Reply  Wed Feb 27 09:57:33 2013, tara, DailyProgress, TempCtrl, Heater for refcav 
          Reply  Thu Feb 28 09:12:22 2013, not tara, DailyProgress, TempCtrl, Heater for refcav 
             Reply  Wed Mar 6 15:44:26 2013, Zach, DailyProgress, TempCtrl, Heater for refcav 
Message ID: 1102     Entry time: Sun Feb 24 01:16:26 2013     Reply to this: 1104
Author: tara 
Type: DailyProgress 
Category: RefCav 
Subject: refcav and mount assembly 

Thermal shields and caps are ready. I cleaned them in ultra sonic bath with Isopropanol. They fit nicely to the mount.

The caps are teflon.

photo(9).JPG    photo(8).JPG

 

==Wire Heater==

I'm think about how to wire the heater around the cavity. I'm reading Frank's entries in PSL:765,768 ,776,786, . Seems like I might need to drill a few holes on the shields for the wires.  There are still more similar wire left. I'll calculate how long the wire has to be for heating the cavity up by 20 K.

 

ELOG V3.1.3-