40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  Coating Ring-down Measurement Lab elog, Page 4 of 18  Not logged in ELOG logo
ID Date Author Type Category Subject
  732   Thu Aug 1 08:37:38 2019 GabrieleGeneralMeasurementsS1600701 S1600702 S1600703 S1600704

2019-08-01

  • 8:35am in chamber
    • S1600701 in CR1
    • S1600702 in CR2
    • S1600703 in CR3
    • S1600704 in CR4
  • 8:38am roughing pump on
  • 8:48am turbo pump on
  731   Wed Jul 31 14:57:26 2019 GabrieleGeneralMeasurementsS1600737 S1600738 S1600739 S1600740

2019-07-31

  • 2:56pm in chamber
    • S1600737 in CR1
    • S1600738 in CR2
    • S1600739 in CR3
    • S1600740 in CR4
  • 3:00pm roughing pump on
  • 3:10pm turbo pump on
  730   Wed Jul 31 08:20:30 2019 GabrieleGeneralMeasurementsS1600697 S1600698 S1600699 S1600700

2019-07-31

  • 8:19am in chamber
    • S1600697 in CR1
    • S1600698 in CR2
    • S1600699 in CR3
    • S1600700 in CR4
  • 8:23am roughing pump on
  • 8:30am turbo pump on
  729   Tue Jul 30 08:11:06 2019 GabrieleGeneralMeasurementsS1600733 S1600734 S1600735 S1600736

2019-07-30

  • 8:08am in chamber
    • S1600733 in CR1
    • S1600734 in CR2
    • S1600735 in CR3
    • S1600736 in CR4
  • 8:09am roughing pump on
  • 8:18am turbo pump on
  728   Mon Jul 29 07:42:56 2019 GabrieleGeneralMeasurementsS1600729 S1600730 S1600731 S1600732

2019-07-29

  • 7:41am in chamber
    • S1600729 in CR1
    • S1600730 in CR2
    • S1600731 in CR3
    • S1600732 in CR4
  • 7:45am roughing pump on
  • 7:55am turbo pump on
  727   Sun Jul 28 12:00:38 2019 GabrieleGeneralMeasurementsS1600725 S1600726 S1600727 S1600728

2019-07-28

  • 12:00pm in chamber
    • S1600725 in CR1
    • S1600726 in CR2
    • S1600727 in CR3
    • S1600728 in CR4
  • 12:05pm roughing pump on
  • 12:15pm turbo pump on
  726   Sat Jul 27 16:01:24 2019 GabrieleGeneralMeasurementsS1600721 S1600722 S1600723 S1600724

2019-07-27

  • 4:00pm in chamber
    • S1600721 in CR1
    • S1600722 in CR2
    • S1600723 in CR3
    • S1600724 in CR4
  • 4:01pmm roughing pump on
  • 4:11pm turbo pump on
  725   Thu Jul 25 11:17:48 2019 GabrieleGeneralMeasurementsS1600701 S1600702 S1600703 S1600704

2019-07-25

  • 11:17am in chamber
    • S1600701 in CR1
    • S1600702 in CR2
    • S1600703 in CR3
    • S1600704 in CR4
  • 11:20am roughing pump on
  • 11:30am turbo pump on
  724   Wed Jul 24 12:41:37 2019 GabrieleGeneralMeasurementsS1600697 S1600698 S1600699 S1600700

2019-07-24

  • 12:40pm in chamber
    • S1600697 in CR1
    • S1600698 in CR2
    • S1600699 in CR3
    • S1600700 in CR4
  • 12:41pm roughing pump on
  • 12:50pm turbo pump on
  723   Mon Jul 22 13:16:15 2019 GabrieleGeneralMeasurementsS1600701 S1600702 S1600703 S1600704

2019-07-22

  • 1:15pm in chamber
    • S1600701 in CR1
    • S1600702 in CR2
    • S1600703 in CR3
    • S1600704 in CR4
  • 1:20pm roughing pump on
  • 1:30pm turbo pump on
  722   Fri Jul 19 12:30:18 2019 GabrieleGeneralMeasurementsS1600697 S1600698 S1600699 S1600700

2019-07-19

  • 12:28pm in chamber
    • S1600697 in CR1
    • S1600698 in CR2
    • S1600699 in CR3
    • S1600700 in CR4
  • 12:30pm roughing pump on
  • 12:40pm turbo pump on
  721   Thu Jul 18 14:08:54 2019 GabrieleGeneralMeasurementsS1800019 S1800020 S1800021 S1800022

2019-07-17

  • 2:05pm in chamber
    • S1800019 in CR1
    • S1800020 in CR2
    • S1800021 in CR3
    • S1800022 in CR4
  • 2:07pm roughing pump on
  • 2:17pm turbo pump on
  720   Sat Jul 13 17:16:18 2019 GabrieleGeneralMeasurementsS1600707 S1600709

2019-07-13

  • 5:15pm in chamber
    • S1600707 in CR2
    • S1600709 in CR4
  • 5:16pm roughing pump on
  • 5:25pm turbo pump on
  719   Thu Jul 11 14:34:04 2019 GabrieleGeneralMeasurementsS1600707 S1600708 S1600709 S1600710

2019-07-10

  • 2:32pm in chamber
    • S1600707 in CR1
    • S1600708 in CR2
    • S1600709 in CR3
    • S1600710 in CR4
  • 2:33pm roughing pump on
  • 2:43pm turbo pump on
  718   Wed Jul 10 14:21:40 2019 GabrieleGeneralMeasurementsS1800019 S1800020 S1800021 S1800022

2019-07-10

  • 2:20pm in chamber
    • S1800019 in CR1
    • S1800020 in CR2
    • S1800021 in CR3
    • S1800022 in CR4
  • 2:21pm roughing pump on
  • 2:30pm turbo pump on
  717   Fri Jul 5 09:00:49 2019 GabrieleGeneralMeasurementsS1600677 S1600681 S1600684 S1600685

2019-07-05

  • 9:00am in chamber
    • S1600677 in CR1
    • S1600681 in CR2
    • S1600684 in CR3
    • S1600685 in CR4
  • 9:05am roughing pump on
  • 9:15am turbo pump on
  716   Thu Jul 4 10:56:38 2019 GabrieleGeneralMeasurementsS1600634 S1600635 S1600649 S1600650

2019-07-04

  • 10:53am in chamber
    • S1600634 in CR1
    • S1600635 in CR2
    • S1600649 in CR3
    • S1600650 in CR4
  • 10:55am roughing pump on
  • 11:05am turbo pump on
  715   Mon Jul 1 11:28:00 2019 GabrieleGeneralMeasurementsS1600677 S1600681 S1600684 S1600685

2019-07-01

  • 11:25am in chamber
    • S1600677 in CR1
    • S1600681 in CR2
    • S1600684 in CR3
    • S1600685 in CR4
  • 11:28am roughing pump on
  • 11:39am turbo pump on
  714   Wed Jun 26 10:16:34 2019 GabrieleGeneralMeasurementsS1600677 S1600681 S1600684 S1600685

2019-06-26

  • 10:15am in chamber
    • S1600677 in CR1
    • S1600681 in CR2
    • S1600684 in CR3
    • S1600685 in CR4
  • 10:16am roughing pump on
  • 10:24am turbo pump on
  713   Fri Jun 21 11:51:14 2019 GabrieleGeneralMeasurementsS1600662 S1600678 S1600680

2019-06-21

  • 11:47am in chamber
    • S1600662 in CR1
    • S1600678 in CR2
    • S1600680 in CR3
  • 11:48am roughing pump on
  • 11:55am turbo pump on
  712   Tue Jun 18 14:55:55 2019 GabrieleGeneralMeasurementsS1600678 S1600680

2019-06-18

  • 2:53pm in chamber
    • S1600678 in CR1
    • S1600680 in CR2
  • 2:55pm roughing pump on
  • 3:05pm turbo pump on
  711   Fri Jun 14 15:16:46 2019 GabrieleGeneralMeasurementsS1600542 S1600664 S1600678 S1600680

2019-06-14

  • 3:14pm in chamber
    • S1600542 in CR1
    • S1600664 in CR2
    • S1600678 in CR3
    • S1600680 in CR4
  • 3:15pm roughing pump on
  • 3:25pm turbo pump on
  710   Wed Jun 12 11:43:12 2019 GabrieleGeneralMeasurementsS1600542 S1600664 S1600678 S1600680

2019-06-12

  • 11:42 in chamber
    • S1600542 in CR1
    • S1600664 in CR2
    • S1600678 in CR3
    • S1600680 in CR4
  • 11:50 roughing pump on
  • 11:58 turbo pump on
  709   Tue Jun 11 15:20:29 2019 GabrieleGeneralMeasurementsS1600634 S1600635

2019-06-11

  • 3:19pm in chamber
    • S1600634 in CR1
    • S1600635 in CR2
  • 3:20p roughing pump on
  • 3:30pm turbo pump on
  708   Mon Jun 10 11:08:57 2019 GabrieleGeneralMeasurementsS1600542 S1600664 S1600678 S1600680

2019-06-10

  • 11:00 in chamber
    • S1600542 in CR1
    • S1600664 in CR2
    • S1600678 in CR3
    • S1600680 in CR4
  • 11:02 roughing pump on
  • 11:13 turbo pump on
  707   Fri Jun 7 07:32:51 2019 AlenaGeneralMeasurementsS1600542 S1600664 S1600678 S1600680

2019-06-06

  • 15:40 in chamber
    • S1600542 in CR1
    • S1600664 in CR2
    • S1600678 in CR3
    • S1600680 in CR4
  • 15:48 roughing pump on
  • 15:57 turbo pump on

The mesuremet started next morning 2019-06-07 at 7:30 AM

  706   Tue Jun 4 15:07:55 2019 AlenaGeneralMeasurementsS1600542 S1600664 S1600678 S1600680

2019-06-04

  • 15:10 in chamber
    • S1600542 in CR1
    • S1600664 in CR2
    • S1600678 in CR3
    • S1600680 in CR4
  • 15:18 roughing pump on
  • 15:31 turbo pump on
  705   Thu May 30 13:53:03 2019 AlenaGeneralMeasurementsS1600717 S1600718 S1600719 S1600720

2019-05-30

  • 14:30 in chamber
    • S1600717 in CR1
    • S1600718 in CR2
    • S1600719in CR3
    • S1600720 in CR
  • 14:40 roughing pump on
  • 14:53 turbo pump on
  704   Wed May 29 08:36:07 2019 AlenaGeneralMeasurementsS1600713 S1600714 S1600715 S1600716

2019-05-24

  • 15:00 in chamber
    • S1600713 in CR1
    • S1600714 in CR2
    • S1600715in CR3
    • S1600716 in CR4

2019-05-25

  • 16:00 roughing pump on
  • 16:10 turbo pump on

2019-05-29

restarted the measuterment

  703   Tue May 28 15:48:42 2019 AlenaGeneralVacuumLow pressure gauge exchange

After venting the vacum chamber (CR14) a few times, checking for leaks and trying to tune settings to the gauges controller, I gave up. I removed the low pressure gauge from the newer vaccum system (CR14). Inspection did now show any obviouse depositions around the electrode (due to some burns). I will pack the gauge ans send it to the manufacture for an RMA. Took the same gause from the older vaccum system (CR0) and installed it on CR14. Started pumping down. The low pressure gause turned on just fine. Will check the preassure in an our before starting a measurement.

  702   Fri May 24 15:08:19 2019 alenaGeneralMeasurementsS1600713 S1600714 S1600715 S1600716

2019-05-24

  • 15:00 in chamber
    • S1600713 in CR1
    • S1600714 in CR2
    • S1600715in CR3
    • S1600716 in CR4
  • 15:08 roughing pump on
  • 15:22 turbo pump on

Low pressure gauge glitching again. Tried restarting the gauge a few times - no result. Vented the chamber.

15:50 restarted the rouging pump, then the tubbo - no result. Aborted the measurement

 

  701   Thu May 23 18:16:11 2019 AlenaGeneralMeasurementsS1600709 S1600710 S1600711 S1600712

2019-05-23

  • 18:00 in chamber
    • S1600709 in CR1
    • S1600710 in CR2
    • S1600711in CR3
    • S1600712 in CR4
  • 18:15 roughing pump on
  • 18:26 turbo pump on
  700   Thu May 23 09:59:09 2019 AlenaGeneralMeasurementsS1600649 S1600650 S1600651 S1600652

2019-05-23

  • 09:50 am in chamber
    • S1600649 in CR1
    • S1600650 in CR2
    • S1600651 in CR3
    • S1600652 in CR4
  • 10:09 am roughing pump on
  • 10:15 am turbo pump on
  699   Wed May 22 07:41:23 2019 AlenaGeneralMeasurementsS1600542 S1600664 S1600680 S1600678

2019-05-22

  • 08:00 am in chamber
    • S1600542 in CR1
    • S1600664 in CR2
    • S1600678 in CR3
    • S1600680 in CR4
  • 08:19 am roughing pump on
  • 08:30 am turbo pump on

Correct samples placement:

  • S1600542 in CR1
  • S1600664 in CR2
  • S1600680 in CR3
  • S1600678 in CR4
  698   Tue May 21 09:44:12 2019 AlenaGeneralMeasurementsS1600684 S1600685 S1600686 S1600689

2019-05-21

  • 09:20 am in chamber
    • S1600684 in CR1
    • S1600685 in CR2
    • S1600686 in CR3
    • S1600689 in CR4
  • 09:30 am roughing pump on
  • 09:44 am turbo pump on
  697   Mon May 20 16:08:19 2019 AlenaGeneralMeasurementsS1600677 S1600681 S1600682 S1600683
  • 2019-05-20

  • 16:08  in chamber
    • S1600677 in CR1
    • S1600681 in CR2
    • S1600682 in CR3
    • S1600683 in CR4
  • 16:22 roughing pump o
  • 16:31 turbo pump on
  696   Mon May 20 10:35:45 2019 aaronCleanGeneralClean room gear

Aaron,

There is a buy list of approved clean room supplies posted here https://dcc.ligo.org/LIGO-E1300399. This list is used by designated people to keep clean rooms supplies stock at each site including LIGO labs in Downs, 40m and the CRIME lab. Not sure what lab you are working in and what regulations you have there. Typically we study the list of the approved supplies, figure out what budget can be used for supplies for a particular experiment. Depending on what your project is, you may be able to just take what you need from the existing LIGO stock (I believe there is one for Downs and one for Bridge and 40m) or work with Liz, Bob or Chub on ordering it for your via approved channels.

Quote:

Mon May 13 18:37:37 2019

Entered CRIME lab to borrow 4x hair nets and face masks. Can you please advise on what I should order for clean lab equipment? There are more options on techmart than I anticipated. We're in the process of increasing the cleanliness of the SiQ experiment.

 

  695   Mon May 20 08:17:23 2019 AlenaGeneralMeasurementsS1600667

2019-05-20

  • 08:17 am in chamber
    • S1600667 in CR1
  • 08:56 am roughing pump on
  • 09:05 am turbo pump on
  694   Fri May 17 12:53:19 2019 AlenaGeneralMeasurementsS1600649 S1600650 S1600651 S1600652

2019-05-17

  • 12:36 pm  in chamber
    • S1600649 in CR1
    • S1600650 in CR2
    • S1600651 in CR3
    • S1600652 in CR4
  • 12:50 pm roughing pump on
  • 13:03 pm turbo pump on
  693   Thu May 16 21:18:40 2019 AlenaGeneralMeasurementsS1600634 S1600635 S1600667 S1600668

2019-05-16

  • 21:00  in chamber
    • S1600634 in CR1
    • S1600635 in CR2
    • S1600667 in CR3
    • S1600668 in CR4
  • 21:05 roughing pump on
  • 21:24 pm turbo pump on
  692   Thu May 16 11:23:13 2019 AlenaGeneralMeasurementsS1600662

2019-05-16

  • 11:10 am in chamber
    • S1600662 in CR1
  • 11:20 am roughing pump on
  • 11:31 am turbo pump on
  691   Wed May 15 13:36:17 2019 AlenaGeneralMeasurementsS1600684 S1600685 S1600686 S1600689

2019-05-10

  • 13:30 in chamber
    • S1600684 in CR1
    • S1600685 in CR2
    • S1600686 in CR3
    • S1600689 in CR4
  • 13:52 roughing pump on
  • 14:01 am turbo pump on
  690   Tue May 14 15:41:51 2019 AlenaGeneralMeasurementsS1600649 S1600650 S1600651 S1600652

2019-05-14

  • 3:30 pm  in chamber
    • S1600649 in CR1
    • S1600650 in CR2
    • S1600651 in CR3
    • S1600652 in CR4
  • 3:40 pm roughing pump on
  • 3:55 pm turbo pump on
  689   Mon May 13 18:37:47 2019 aaronCleanGeneralClean room gear

Mon May 13 18:37:37 2019

Entered CRIME lab to borrow 4x hair nets and face masks. Can you please advise on what I should order for clean lab equipment? There are more options on techmart than I anticipated. We're in the process of increasing the cleanliness of the SiQ experiment.

  688   Mon May 13 12:50:14 2019 AlenaGeneralMeasurementsS1600634 S1600635 S1600667 S1600668

2019-05-13

  • 12:40 pm  in chamber
    • S1600634 in CR1
    • S1600635 in CR2
    • S1600667 in CR3
    • S1600668 in CR4
  • 12:50 pm roughing pump on
  • 13:03 pm turbo pump on
  687   Fri May 10 11:06:25 2019 GabrieleGeneralMeasurementsS1600684 S1600685 S1600686 S1600689

2019-05-10

  • 11:05 am  in chamber
    • S1600684 in CR1
    • S1600685 in CR2
    • S1600686 in CR3
    • S1600689 in CR4
  • 11:15 am roughing pump o
  • 11:23 am turbo pump on
  686   Thu May 9 08:30:57 2019 GabrieleGeneralMeasurementsS1600633 S1600636 S1600688 S1600690

2019-05-09

  • 8:30 am  in chamber
    • S1600633 in CR1
    • S1600636 in CR2
    • S1600688 in CR3
    • S1600690 in CR4
  • 8:34 am roughing pump o
  • 8:43 pm turbo pump on
  685   Wed May 8 12:43:47 2019 GabrieleGeneralMeasurementsS1600684 S1600685 S1600686 S1600689

2019-05-08

  • 12:42 pm  in chamber
    • S1600684 in CR1
    • S1600685 in CR2
    • S1600686 in CR3
    • S1600689 in CR4
  • 12:48 pm roughing pump o
  • 12:58 pm turbo pump on
  684   Tue May 7 15:30:59 2019 GabrieleGeneralMeasurementsS1600658 S1600659 S1600660 S1600661 S1600662

2019-05-07

  • 3:29 pm  in chamber
    • S1600658 in CR0
    • S1600659 in CR1
    • S1600660 in CR2
    • S1600661 in CR3
    • S1600662 in CR4
  • 3:30 pm roughing pump on (CR1-4)
  • 3:37 pm roughing pump on (CR0)
  • 3:40 pm turbo pump on (CR1-4)
  • 4:00 pm turbo pump on (CR0)
  683   Mon May 6 10:05:19 2019 GabrieleGeneralMeasurementsS1600634 S1600635 S1600667 S1600668

2019-05-06

  • 10:04 am  in chamber
    • S1600634 in CR1
    • S1600635 in CR2
    • S1600667 in CR3
    • S1600668 in CR4
  • 10:05 am roughing pump on
  • 11:21 am turbo pump on
ELOG V3.1.3-