40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  Coating Ring-down Measurement Lab elog  Not logged in ELOG logo
Message ID: 64     Entry time: Wed Jul 27 10:19:36 2016
Author: Gabriele 
Type: Electronics 
Category: Configuration 
Subject: Last finding in the signal jump saga 

This plot shows a signal which is generated purely digitally inside a code that I was testing.

Jumps are present even in this case.

Another addition: I was testing some simple code I was writing. Forget about OUT1 and OUT2, but OUT3 and OUT4 should be simple counters. Here's what I get by running the code on cymac3:

Since it didn't make any sense, I ran the same code on cymac2. Here's the (correct) result:

So there's something wrong even when all-digital signals are generated.

ELOG V3.1.3-