40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  Coating Ring-down Measurement Lab elog  Not logged in ELOG logo
Message ID: 420     Entry time: Fri Aug 18 15:10:23 2017
Author: Zach, Gabriele 
Type: Electronics 
Category: Modeling 
Subject: ESD prototype 

2017-08-18

  • We created a prototype of PCB for the ESD design. Unfortunately the orientation of the two combs was flipped, so it will require some creative mounting to get right. The final design had a 6 mm offset between the two combs, .5 mm traces and 1 mm gaps between them The vertical traces are 12 mm long and there is a 3.75 mm gap between the end of the vertical traces and the opposite horizontal one. The ESD will arrive on Tuesday to be installed Wednesday and we will see how the new design works out.

 

Attachment 1: Crime_ESD_Zach_prototype.pdf  11 kB  | Hide | Hide all
Crime_ESD_Zach_prototype.pdf
ELOG V3.1.3-