40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  Coating Ring-down Measurement Lab elog  Not logged in ELOG logo
Message ID: 378     Entry time: Tue Jul 25 13:38:30 2017
Author: Zach 
Type: Electronics 
Category: Modeling 
Subject: Parametric Sweep of ESD gap 

2017-07-25

  • I completed a short sweep of the gap between the drive and the sample, between .5 and 1 mm in .1 mm increments. It appears that a 1 mm distance is the ideal distance by approximately a factor of two. I will next sweep larger distances and see how the force profile behaves at greater distances.

ELOG V3.1.3-