|
40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
| Coating Ring-down Measurement Lab elog |
Not logged in |
 |
|
|
|
Message ID: 277
Entry time: Wed Jan 25 16:12:05 2017
|
| Author: |
Gabriele |
| Type: |
General |
| Category: |
Daily Progress |
| Subject: |
Some assembly |
|
|
- assembled the four in-vacuum periscopes (no mirrors yet)
- soldered kapton wires to the four ESD board; the vacuum side HV connectors are installed
- installed the picomotor into the traslation stage, and soldered the two picomotor wires to a twisted kapton pair. Note: the white wire is connected to the kapton wire which is twisted on the other side.
|